MULTIPRO  For DIY Market
   
     
    PEC-CM42 COLOR CCD CAMERA set  $215.00
   
GENERAL FEATURES
Complete COLOR CCD Camera Set
No needed CCTV Monitor
Available with Home TV Set
Design to work with any types of VCR
Low Light Capability
Easy Hookup with simple to install

 INTRODUCTION
Whether you are monitoring your newborn or securing your home,
MultiPRO camera offers an affordable discreet and high-tech solution.
MultiPRO camera is a multi-purpose camera for the following applications
Security - Enjoy peace of mind knowing MultiPRO camera is watching your shop, garage, or the entrance to your home.
Investigation - keep your own surveillance and record evidence.
Multimedia - capture your own images for screensavers, post a video on the internet, or tele-conference form your office.
Child Monitoring - Watch your baby during naptime or your children in the pool.

 SPECIFICATIONS
       
  Image Sensor   1/3" or 1/4" Interline COLOR CCD 
No.of Image Pixels   NTSC : 512(H) x 492(V), PAL : 512(H) x 582(V)
Horizontal Resolution   330 TV lines
Scanning System   2:1 Interlace
Sync. System   Internal Sync. System
Output Signal   1 Vp-p Composite Video, 75 ohm.
Min. Illumination   1.Lux available ( F=1.2)
Shutter Speed   Auto, 1/60(1/50) ~ 1/100000 Sec.
Power Requirement   DC12V, 110mA
Audio   One way audio ( Two way are option)
Lens   Standard f=3.6mm, 92deg. Lens
(78Deg. Lens, pinhole lens are option)
Adaptor   DC12V, AC110/220V ( DC12V, AC86-245V
Free voltage SMPS adaptor are option)
Cable   7.5m Standard ( 10m Din to Din cable,
30cm Din to RCA cable set are option)
Packing Method   Color gift box
Camera Dimension   50(W) x 61(H) x 38(D)mm (Regular lens type)
Packing Dimension   200(W) x 300(H) x 65(H)mm
Gross Weight   Approx. 450 g

STANDARD ACCESSORIES    INSTALLATION FEATURES
     
Standard Accessories for MultiPRO will be provided from manufacturer when you purchasing as follows :
  Wall mounting bracket, Cables with Din to Din connector Multicable for Din to RCA Connection Power adaptor Connector for BNC to RCA 

กก

  MultiPRO has designed to work with any types of TV or VCR. If your TV does not have A/V input jacks built-in, You can still connect MultiPRO by first connecting it to your VCR, then to the TV using a coaxial cable. After connecting the wires, press the A/V input selector on your remote for the TV or VCR. (the button should be labeled as A/V, Line, Aux or input, refer it to the owner's manual)
That's all it takes to enjoy quality video compatible to any other CCTV systems out in the market today.

 CONNECTION DIAGRAM
 
   

BACK TO SMElectronics.COM SECURITY PAGE